FMS Configuration Data Items

EFM Data Items: FMS Configuration

The flow measurement configuration data item strings that follow describe FMS Configuration data items supported by CygNet.

Note: The eventItems section of your device template file does not contain configuration data items. However, changes to any data item in the configItem section results in an event being sent to FMS. Configuration data items are omitted from the eventItems section of the device template file to avoid data item duplication within the device template file.

See CygNet Measurement and Using the Configuration Control for more information about configuration data item usage in CygNet Measurement.

Configuration data item strings are listed in the following table along with their corresponding value options.

The table lists configuration data item strings in sections according to type of usage.

See FMS Data Items Units for information about valid units for configuration data items requiring units.

See Required Device Configuration Data for CygNet Measurement for information about minimum configuration requirements according to calculation/device type.

FMS Configuration Data Item String	Enum	Data Item Description	Units Required for FMS?	FMS Explorer Description
Gas Analysis Configuration Items
Also valid: Quality configuration items (except those marked liquid-specific)
eFMS_CFG_GAS_ANALYSIS_BASE_PRESSURE	601	Base pressure	Yes	Base Pressure
eFMS_CFG_GAS_ANALYSIS_BASE_TEMPERATURE	602	Base temperature	Yes	Base Temperature
eFMS_CFG_GAS_ANALYSIS_HEATING_VALUE_BASIS	603	Heating Value basis	No	Heating Value Basis
eFMS_CFG_HEATING_VALUE_VOLUME_WET	545	Heating Value Volume - Wet	Yes	Heating Value Volume (Wet)
eFMS_CFG_HEATING_VALUE_VOLUME_DRY	546	Heating Value Volume - Dry	Yes	Heating Value Volume (Dry)
eFMS_CFG_HEATING_VALUE_VOLUME_AS_DELIVERED	547	Heating Value Volume - As delivered	Yes	Heating Value Volume - (As delivered)
eFMS_CFG_H2O_PER_VOLUME	548	Water - per volume unit	Yes	H2O per volume
eFMS_CFG_H2S_PPM	549	Hydrogen Sulfide - parts per million	Yes	H2S (PPM)
eFMS_CFG_TOTAL_H2S_PPM	554	Total Hydrogen Sulfide - parts per million	Yes	Total H2S (PPM)
eFMS_CFG_COS_PPM	550	Carbonyl Sulfide - parts per million	Yes	COS (PPM)
eFMS_CFG_MESH_PPM	551	Methanethiol - parts per million	Yes	MESH (PPM)
eFMS_CFG_ETSH_PPM	552	Ethanethiol - parts per million	Yes	ETSH (PPM)
eFMS_CFG_DMS_PPM	553	Dimethyl Sulfide - parts per million	Yes	DMS (PPM)
eFMS_CFG_SAMPLE_PRESSURE	555	Sample pressure	Yes	Sample Pressure
eFMS_CFG_SAMPLE_TEMPERATURE	556	Sample temperature	Yes	Sample Temperature
eFMS_CFG_SAMPLE_COUNT	557	Sample count	No	Sample Count
eFMS_CFG_SAMPLE_DATE	512	Sample date	No	Sample Date
eFMS_CFG_SAMPLE_TYPE	513	Sample type	No	Sample Type Options are as follows. 1 or eFMS_CFG_SAMPLE_TYPE_SPOT - Spot; single sample taken 2 or eFMS_CFG_SAMPLE_TYPE_COMPOSITE - Composite; sample taken on regular interval 3 or eFMS_CFG_SAMPLE_TYPE_OFFLINE_UNKNOWN - Offline; method unknown 4 or eFMS_CFG_SAMPLE_TYPE_ONLINE - Online; chromatograph
eFMS_CFG_SAMPLE_RATE	522	Sample rate	No	Sample Rate
eFMS_CFG_INSTRUMENT_NUMBER	558	Instrument number for the sample	No	Instrument Number
eFMS_CFG_SAMPLE_TECHNICIAN	559	Name of the sample technician	No	Sample Technician
eFMS_CFG_SAMPLE_COMMENTS	560	Comments for the sample	No	Sample Comments
eFMS_CFG_ANALYSIS_TECHNICIAN	561	Name of the analysis technician	No	Analysis Technician
eFMS_CFG_ANALYSIS_COMMENTS	562	Comments for the analysis	No	Analysis Comments
eFMS_CFG_HEXANE_PLUS	563	Hexane plus	Yes	n-Hexane Plus
eFMS_CFG_ETHANE_LC	564	Ethane - Liquid Content	Yes	Ethane LC
eFMS_CFG_PROPANE_LC	565	Propane - Liquid Content	Yes	Propane LC
eFMS_CFG_ISOBUTANE_LC	607	Isobutane - Liquid Content	Yes	Isobutane LC
eFMS_CFG_N_BUTANE_LC	566	n-Butane - Liquid Content	Yes	n-Butane LC
eFMS_CFG_ISOPENTANE_LC	567	Isopentane - Liquid Content	Yes	Isopentane LC
eFMS_CFG_N_PENTANE_LC	568	n-Pentane - Liquid Content	Yes	n-Pentane LC
eFMS_CFG_N_HEXANE_LC	569	n-Hexane - Liquid Content	Yes	n-Hexane LC
eFMS_CFG_N_HEPTANE_LC	570	n-Heptane - Liquid Content	Yes	n-Heptane LC
eFMS_CFG_N_OCTANE_LC	608	n-Octane - Liquid Content	Yes	n-Octane LC
eFMS_CFG_N_NONANE_LC	609	n-Nonane - Liquid Content	Yes	n-Nonane LC
eFMS_CFG_N_DECANE_LC	610	n-Decane - Liquid Content	Yes	n-Decane LC
eFMS_CFG_CONDENSATE_LC	571	Condensate - Liquid Content	Yes	Condensate LC
Custom Gas Analysis Configuration Items
eFMS_CFG_CUSTOM_NUMBER1	596	Custom Number 1	No	As configured; can be any valid supported numerical configuration item Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_CUSTOM_NUMBER2	597	Custom Number 2	No	As configured; can be any valid supported numerical configuration item Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_CUSTOM_NUMBER3	598	Custom Number 3	No	As configured; can be any valid supported numerical configuration item Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_CUSTOM_NUMBER4	599	Custom Number 4	No	As configured; can be any valid supported numerical configuration item Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_CUSTOM_NUMBER5	600	Custom Number 5	No	As configured; can be any valid supported numerical configuration item Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
Quality Configuration Items (also valid as Gas Analysis or Metering configuration items, except those marked liquid-specific)
eFMS_CFG_METHANE	30	Methane (C1)	Yes	Methane
eFMS_CFG_ETHANE	31	Ethane (C2)	Yes	Ethane
eFMS_CFG_PROPANE	32	Propane (C3)	Yes	Propane
eFMS_CFG_ISOBUTANE	33	Isobutane (isoC4)	Yes	Isobutane
eFMS_CFG_N_BUTANE	34	n-Butane (C4)	Yes	n-Butane
eFMS_CFG_ISOPENTANE	35	Isopentane (isoC5)	Yes	Isopentane
eFMS_CFG_N_PENTANE	36	n-Pentane (C5)	Yes	n-Pentane
eFMS_CFG_NEO_PENTANE	37	Neopentane (neoC5)	Yes	Neopentane
eFMS_CFG_N_HEXANE	38	n-Hexane (C6)	Yes	n-Hexane
eFMS_CFG_N_HEPTANE	39	n-Heptane (C7)	Yes	n-Heptane
eFMS_CFG_N_OCTANE	40	n-Octane (C8)	Yes	n-Octane
eFMS_CFG_N_NONANE	41	n-Nonane (C9)	Yes	n-Nonane
eFMS_CFG_N_DECANE	42	n-Decane (C10)	Yes	n-Decane
eFMS_CFG_NITROGEN	43	Nitrogen (N2)	Yes	Nitrogen
eFMS_CFG_CARBON_DIOXIDE	44	Carbon dioxide (CO2)	Yes	Carbon Dioxide
eFMS_CFG_WATER	45	Water (H2O)	Yes	Water
eFMS_CFG_HYDROGEN_SULFIDE	46	Hydrogen sulfide (H2S)	Yes	Hydrogen Sulfide
eFMS_CFG_HYDROGEN	47	Hydrogen (H2)	Yes	Hydrogen
eFMS_CFG_CARBON_MONOXIDE	48	Carbon monoxide (CO)	Yes	Carbon Monoxide
eFMS_CFG_OXYGEN	49	Oxygen (O2)	Yes	Oxygen
eFMS_CFG_HELIUM	50	Helium (He)	Yes	Helium
eFMS_CFG_ARGON	51	Argon (Ar)	Yes	Argon
eFMS_CFG_DEW_POINT	60	Dew point	No	Dew Point
eFMS_CFG_RELATIVE_DENSITY	58	Relative density	No	Relative Density
eFMS_CFG_VISCOSITY	61	Viscosity	Yes	Viscosity
Quality Configuration Items - Gas-Specific
eFMS_CFG_COMPRESSIBILITY	59	Compressibility (gas-specific)	No	Compressibility
eFMS_CFG_HEATING_VALUE_BASIS	57	Heating value basis (gas-specific)	No	(Config) Heating Value Basis Options are as follows. 1 or eFMS_CFG_HEATING_VALUE_BASIS_WET - Wet 2 or eFMS_CFG_HEATING_VALUE_BASIS_DRY - Dry 3 or eFMS_CFG_HEATING_VALUE_BASIS_AS_DELIVERED - As delivered 4 or eFMS_CFG_HEATING_VALUE_BASIS_UNSPECIFIED - Unspecified
eFMS_CFG_HEATING_VALUE_MASS	56	Heating value - mass (gas-specific)	Yes	(Config) Heating Value Mass
eFMS_CFG_HEATING_VALUE_VOLUME	55	Heating value - volume (gas-specific)	Yes	(Config) Heating Value Volume
Quality Configuration Items - Liquid-Specific (not currently supported in FMS Explorer controls)
eFMS_CFG_ETHYLENE	540	Ethylene (liquid-specific)	Yes	Ethylene
eFMS_CFG_PROPYLENE	541	Propylene (liquid-specific)	Yes	Propylene
Metering Configuration Items
Also valid: Quality configuration items (except those marked liquid-specific)
eFMS_CFG_ATMOSPHERIC_PRESSURE	24	Atmospheric pressure	Yes	Atmospheric Pressure
eFMS_CFG_CALIBRATION_FACTOR	78	Calibration factor	No	Calibration Factor
eFMS_CFG_CONTRACT_HOUR	9	Contract hour	No	Contract Hour
eFMS_CFG_DP_ALARM_HIGH	107	DP alarm - high	Yes	DP Alarm High
eFMS_CFG_DP_ALARM_LOW	106	DP alarm - low	Yes	DP Alarm Low
eFMS_CFG_DP_BACKFLOW_ALARM	114	DP alarm - backflow	Yes	DP Backflow Alarm
eFMS_CFG_DP_CALIBRATE_HIGH	116	DP calibrate - high	Yes	DP Calibrate High
eFMS_CFG_DP_CALIBRATE_LOW	115	DP calibrate - low	Yes	DP Calibrate Low
eFMS_CFG_DP_TAPS_TYPE	21	DP taps type	No	DP Tap Style Options are as follows. 1 or eFMS_CFG_DP_TAPS_TYPE_FLANGE - Flange 2 or eFMS_CFG_DP_TAPS_TYPE_PIPE - Pipe
eFMS_CFG_DP_TRANSDUCER_RANGE_HIGH	101	DP transducer range - high	Yes	DP Transducer Range High
eFMS_CFG_DP_TRANSDUCER_RANGE_LOW	100	DP transducer range - low	Yes	DP Transducer Range Low
eFMS_CFG_ELEVATION	86	Elevation	Yes	Elevation
eFMS_CFG_FIXED_TEMP	85	Fixed temperature	Yes	Fixed Temp (if eFMS_CFG_USE_LIVE_TEMP = No)
eFMS_CFG_FLOW_COMPUTER_ID	133	Flow computer ID	No	Flow Computer ID
eFMS_CFG_FLOW_COMPUTER_BRAND	134	Flow computer brand	No	Flow Computer Brand
eFMS_CFG_FLOW_COMPUTER_MODEL	135	Flow computer model	No	Flow Computer Model
eFMS_CFG_FLOW_COMPUTER_SOFTWARE_VERSION	136	Flow computer software version	No	Flow Computer Software Version
eFMS_CFG_FLOW_RATE_ALARM_HIGH	113	Flow rate - high	Yes	Flow Rate Alarm High
eFMS_CFG_FLOW_RATE_ALARM_LOW	112	Flow rate - low	Yes	Flow Rate Alarm Low
eFMS_CFG_FLUID_TYPE	81	Fluid type	No	Fluid Type Options are as follows. 1 or eFMS_CFG_FLUID_TYPE_COMPRESSIBLE - Compressible 2 or eFMS_CFG_FLUID_TYPE_NONCOMPRESSIBLE - Non-compressible
eFMS_CFG_ISENTROPIC_EXPONENT	82	Isentropic exponent	No	Isentropic Exponent
eFMS_CFG_LOW_FLOW_CUTOFF_DP	89	Low flow cutoff - differential pressure	Yes	Low Flow Cutoff DP (can apply to Orifice or Cone device type)
eFMS_CFG_LOW_FLOW_CUTOFF_FLOW_RATE	90	Low flow cutoff - volume flow rate	Yes	Low Flow Cutoff Flow Rate (can apply to Orifice, Turbine, Ultrasonic, Cone, or Coriolis device type)
eFMS_CFG_LOW_FLOW_CUTOFF_MASS	128	Low flow cutoff - mass flow rate	Yes	Low Flow Cutoff Mass (can apply to Coriolis device type)
eFMS_CFG_LOW_FLOW_CUTOFF_PULSE_INTERVAL	91	Low flow cutoff - pulse interval	Yes	Low Flow Cutoff Pulse Interval (can apply to Turbine, Ultrasonic, or Coriolis device type)
eFMS_CFG_METER_DESC	8	Meter description	No	Device Desc
eFMS_CFG_METER_FACTOR	25	Meter factor	No	Meter Factor
eFMS_CFG_METER_ID	7	Meter ID	No	Device Name
eFMS_CFG_METER_TUBE_INSIDE_DIAMETER	12	Meter tube inside diameter	Yes	Meter Tube Inside Diameter
eFMS_CFG_METER_TUBE_MATERIAL	14	Meter tube material	No	Meter Tube Material Options are as follows. 1 or eFMS_CFG_MATERIAL_TYPE_STAINLESS_STEEL - Stainless steel (unspecified type) 2 or eFMS_CFG_MATERIAL_TYPE_MONEL - Monel (valid for AGA 3 1985 or 1992 only) 3 or eFMS_CFG_MATERIAL_TYPE_CARBON_STEEL - Carbon steel 4 or eFMS_CFG_MATERIAL_TYPE_UNSPECIFIED - Unspecified 5 or eFMS_CFG_MATERIAL_TYPE_STAINLESS_STEEL_304 - Stainless steel 304 (valid for AGA 3 2013 only) 6 or eFMS_CFG_MATERIAL_TYPE_STAINLESS_STEEL_316 - Stainless steel 316 (valid for AGA 3 2013 only) 7 or eFMS_CFG_MATERIAL_TYPE_MONEL_400 - Monel 400 (valid for AGA 3 2013 only) Note: This field is "Unspecified" for devices that do not return a material type value. In these cases, a (non-zero) thermal expansion coefficient value (eFMS_CFG_PIPE_COEFFICIENT_THERMAL_EXPANSION) is required for calculation to succeed.
eFMS_CFG_METER_TUBE_REF_TEMP	13	Meter tube reference temperature	Yes	Meter Tube Ref Temp
eFMS_CFG_METER_TYPE	1	Meter type	No	Device Type Options are as follows. 1 or eFMS_CFG_METER_TYPE_ORIFICE - Orifice 2 or eFMS_CFG_METER_TYPE_POSITIVE - Positive (supported for liquid devices) 3 or eFMS_CFG_METER_TYPE_TURBINE - Turbine 4 or eFMS_CFG_METER_TYPE_ULTRASONIC - Ultrasonic 5 - (not supported) 6 or eFMS_CFG_METER_TYPE_CONE - Cone 7 or eFMS_CFG_METER_TYPE_CORIOLIS - Coriolis
eFMS_CFG_ORIFICE_PLATE_BORE_SIZE	15	Orifice plate bore size	Yes	Orifice Plate Bore Size
eFMS_CFG_ORIFICE_PLATE_MATERIAL	17	Orifice plate material	No	Orifice Plate Material Options are as follows. 1 or eFMS_CFG_MATERIAL_TYPE_STAINLESS_STEEL - Stainless steel (unspecified type) 2 or eFMS_CFG_MATERIAL_TYPE_MONEL - Monel (valid for AGA 3 1985 or 1992 only) 3 or eFMS_CFG_MATERIAL_TYPE_CARBON_STEEL - Carbon steel 4 or eFMS_CFG_MATERIAL_TYPE_UNSPECIFIED - Unspecified 5 or eFMS_CFG_MATERIAL_TYPE_STAINLESS_STEEL_304 - Stainless steel 304 (valid for AGA 3 2013 only) 6 or eFMS_CFG_MATERIAL_TYPE_STAINLESS_STEEL_316 - Stainless steel 316 (valid for AGA 3 2013 only) 7 or eFMS_CFG_MATERIAL_TYPE_MONEL_400 - Monel 400 (valid for AGA 3 2013 only) Note: This field is "Unspecified" for devices that do not return a material type value. In these cases, a (non-zero) thermal expansion coefficient value (eFMS_CFG_PIPE_COEFFICIENT_THERMAL_EXPANSION) is required for calculation to succeed.
eFMS_CFG_ORIFICE_PLATE_REF_TEMP	16	Orifice plate reference temperature	Yes	Orifice Plate Ref Temp
eFMS_CFG_SP_ALARM_HIGH	109	SP alarm - high	Yes	SP Alarm High
eFMS_CFG_SP_ALARM_LOW	108	SP alarm - low	Yes	SP Alarm Low
eFMS_CFG_SP_CALIBRATE_HIGH	118	SP calibrate - high	Yes	SP Calibrate High
eFMS_CFG_SP_CALIBRATE_LOW	117	SP calibrate - low	Yes	SP Calibrate Low
eFMS_CFG_SP_SENSOR_TYPE	23	SP sensor type	No	SP Sensor Type Options are as follows. 1 or eFMS_CFG_SP_SENSOR_TYPE_ABSOLUTE - Absolute 2 or eFMS_CFG_SP_SENSOR_TYPE_GAUGE - Gauge
eFMS_CFG_SP_TAP_LOCATION	22	SP tap location	No	SP Tap Location Options are as follows. 1 or eFMS_CFG_SP_TAP_LOCATION_UPSTREAM - Upstream 2 or eFMS_CFG_SP_TAP_LOCATION_DOWNSTREAM - Downstream
eFMS_CFG_SP_TRANSDUCER_RANGE_LOW	102	SP transducer range - low	Yes	SP Transducer Range Low
eFMS_CFG_SP_TRANSDUCER_RANGE_HIGH	103	SP transducer range - high	Yes	SP Transducer Range High
eFMS_CFG_TEMP_ALARM_HIGH	111	Temp alarm - high	Yes	Temp Alarm High
eFMS_CFG_TEMP_ALARM_LOW	110	Temp alarm - low	Yes	Temp Alarm Low
eFMS_CFG_TEMP_CALIBRATE_HIGH	120	Temp calibrate - high	Yes	Temp Calibrate High
eFMS_CFG_TEMP_CALIBRATE_LOW	119	Temp calibrate - low	Yes	Temp Calibrate Low
eFMS_CFG_TEMP_CALIBRATE_ZERO	121	Temp calibrate - zero	Yes	Temp Calibrate Zero
eFMS_CFG_TEMP_TRANSDUCER_RANGE_LOW	104	Temp transducer range - low	Yes	Temp Transducer Range Low
eFMS_CFG_TEMP_TRANSDUCER_RANGE_HIGH	105	Temp transducer range - high	Yes	Temp Transducer Range High
eFMS_CFG_USE_LIVE_TEMP	84	Use live temperature	No	Use Live Temp Options are as follows. 0 or eFMS_YESNO_NO - No 1 or eFMS_YESNO_YES - Yes
eFMS_CFG_USE_LIVE_K_FACTOR	125	Use live K factor	No	Use Live K Factor Options are as follows. 0 or eFMS_YESNO_NO - No 1 or eFMS_YESNO_YES - Yes
eFMS_CFG_USE_LIVE_METER_FACTOR	126	Use live meter factor	No	Use Live Meter Factor Options are as follows. 0 or eFMS_YESNO_NO - No 1 or eFMS_YESNO_YES - Yes
Metering Configuration Items - Gas-Specific
eFMS_CFG_AGA3_EXPANDED_RANGE	88	AGA 3 Expanded Range (gas-specific)	No	AGA 3 Expanded Range Options are as follows. 0 or eFMS_YESNO_NO - No 1 or eFMS_YESNO_YES - Yes
eFMS_CFG_AGA8_EXPANDED_RANGE See AGA 8 Data Ranges for more information.	87	AGA 8 Expanded Range (gas-specific)	No	AGA 8 Expanded Range Options are as follows. 0 or eFMS_YESNO_NO - No 1 or eFMS_YESNO_YES - Yes
eFMS_CFG_BASE_COMPRESSIBILITY_OF_AIR	83	Standard air compressibility (gas-specific)	No	Base Compressibility of Air
eFMS_CFG_BASE_PRESSURE	10	Base pressure (gas-specific)	Yes	(Config) Base Pressure
eFMS_CFG_BASE_TEMPERATURE	11	Base temperature (gas-specific)	Yes	(Config) Base Temp
eFMS_CFG_CALC_METHOD_DISCHARGE_COEFFICIENT	5	Discharge coefficient calc method (gas-specific)	No	Discharge Coefficient Calc Options are as follows. 1 or eFMS_CFG_CALC_METHOD_DISCHARGE_COEFFICIENT_NONE - None
eFMS_CFG_CALC_METHOD_FPV	3	Compressibility calc method (gas-specific)	No	FPV Calc Options are as follows. 1 or eFMS_CFG_CALC_METHOD_FPV_AGA8_GROSS_1 - AGA 8 Gross 1 2 or eFMS_CFG_CALC_METHOD_FPV_AGA8_GROSS_2 - AGA 8 Gross 2 3 or eFMS_CFG_CALC_METHOD_FPV_AGA8_DETAIL - AGA 8 Detail 4 or eFMS_CFG_CALC_METHOD_FPV_NX19_GCN - NX 19 GCN 5 or eFMS_CFG_CALC_METHOD_FPV_NX19_COMPLETE - NX 19 Complete 6 or eFMS_CFG_CALC_METHOD_FPV_NONE - None 7 - GERG (not supported)
eFMS_CFG_CALC_METHOD_GAS_EXPANSION_FACTOR	6	Gas expansion factor calc method (gas-specific)	No	Gas Expansion Factor Calc Options are as follows. 1 or eFMS_CFG_CALC_METHOD_GAS_EXPANSION_FACTOR_NONE - None
eFMS_CFG_CALC_METHOD_HV	4	Heating value calc method (gas-specific)	No	HV Calc Options are as follows. 1 or eFMS_CFG_CALC_METHOD_HV_AGA5 - AGA 5 2 or eFMS_CFG_CALC_METHOD_HV_GPA2172 - GPA 2172 3 or eFMS_CFG_CALC_METHOD_HV_NONE - None Note: For gas analysis, FMS calculations are based on GPA 2172-09. See CygNet Measurement Data Calculation for more information.
eFMS_CFG_CALC_METHOD_PRIMARY	2	Primary calc method (gas-specific)	No	Primary Calc Options are as follows. 1 or eFMS_CFG_CALC_METHOD_PRIMARY_AGA3_85 - AGA 3 1985 2 or eFMS_CFG_CALC_METHOD_PRIMARY_AGA3_92 - AGA 3 1992 3 or eFMS_CFG_CALC_METHOD_PRIMARY_AGA7 - AGA 7 4 - Cone (not supported) 5 - AGA 9 (not supported) 6 or eFMS_CFG_CALC_METHOD_PRIMARY_AGA11 - AGA 11 7 or eFMS_CFG_CALC_METHOD_PRIMARY_VCONE - VCone 8 - AGA 5 (not supported) 9 - ISO 9951 (not supported) 10 - ISO 5167 (not supported) 11 or eFMS_CFG_CALC_METHOD_PRIMARY_WAFER_CONE - Wafer Cone 12 or eFMS_CFG_CALC_METHOD_PRIMARY_AGA3_13 - AGA 3 2013
eFMS_CFG_CONE_COEFFICIENT_THERMAL_EXPANSION	130	Cone thermal expansion coefficient (gas-specific)	Yes	Cone Expansion Coefficient
eFMS_CFG_CONE_DIAMETER	18	Cone diameter (gas-specific)	Yes	Cone Diameter
eFMS_CFG_CONE_MATERIAL	20	Cone material (gas-specific)	No	Cone Material Options are as follows. 1 or eFMS_CFG_MATERIAL_TYPE_STAINLESS_STEEL - Stainless steel 2 or eFMS_CFG_MATERIAL_TYPE_MONEL - Monel 3 or eFMS_CFG_MATERIAL_TYPE_CARBON_STEEL - Carbon steel 4 or eFMS_CFG_MATERIAL_TYPE_UNSPECIFIED - Unspecified Note: This field is "Unspecified" for devices that do not return a material type value. In these cases, a (non-zero) thermal expansion coefficient value (eFMS_CFG_CONE_COEFFICIENT_THERMAL_EXPANSION) is required for calculation to succeed.
eFMS_CFG_CONE_REF_TEMP	19	Cone reference temperature (gas-specific)	Yes	Cone Ref Temp
eFMS_CFG_DISCHARGE_COEFFICIENT	27	Discharge coefficient (gas-specific)	No	Discharge Coefficient
eFMS_CFG_INTEGRAL_VALUE_VARIABLES	28	Variables included in IV (gas-specific)	No	IV Definition Options are as follows. 1 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_BASE_FT - (FTDP[inh2o]SP[psia]) 2 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_PLUS_TEMP_FT - (FTDP[inh2o]SP[psia])/T[R] 3 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_PLUS_GR_FT - (FTDP[inh2o]SP[psia])/Gr 4 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_PLUS_TEMP_GR_FT - (FTDP[inh2o]SP[psia])/(T[R]Gr)) 5 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_NONE* - None 6 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_BASE_EX1_FT - (FTDP[mBar]SP[bar]) 7 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_PLUS_TEMP_EX1_FT - (FTDP[mBar]SP[bar])/T[K] 8 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_BASE - (DP[inh2o]SP[psia]) 9 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_PLUS_TEMP* - (DP[inh2o]SP[psia])/T[R] 10 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_PLUS_GR* - (DP[inh2o]SP[psia])/Gr 11 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_PLUS_TEMP_GR* - (DP[inh2o]SP[psia])/(T[R]Gr) 12 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_BASE_EX1 - (DP[mBar]SP[bar]) 13 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_PLUS_TEMP_EX1* - (DP[mBar]*SP[bar])/T[K]
eFMS_CFG_GAS_K_FACTOR_MASS	127	K factor - mass (gas-specific)	Yes	K Factor Mass
eFMS_CFG_GAS_K_FACTOR_VOLUME	26	K factor - volume (gas-specific)	Yes	K Factor Volume
eFMS_CFG_ORIFICE_COEFFICIENT_THERMAL_EXPANSION	75	Orifice (linear) thermal expansion coefficient (gas-specific)	Yes	Orifice Expansion Coefficient
eFMS_CFG_PIPE_COEFFICIENT_THERMAL_EXPANSION	76	Pipe (linear) thermal expansion coefficient (gas-specific)	Yes	Pipe Expansion Coefficient
eFMS_CFG_LINEAR_CURVE_TYPE	129	Linear curve type (gas-specific)	No	Linear Curve Type Options are as follows. 1 or eFMS_CFG_LINEAR_CURVE_TYPE_BOTH_CONST - Meter Factor and K Factor are both constant 2 or eFMS_CFG_LINEAR_CURVE_TYPE_KF_AVG - K Factor is averaged, and Meter Factor is constant 3 or eFMS_CFG_LINEAR_CURVE_TYPE_MF_AVG - Meter Factor is averaged, and K Factor is constant
eFMS_CFG_USE_CORIOLIS_PRESSURE_EFFECT	122	Use coriolis pressure effect (gas-specific)	No	Use Coriolis Pressure Effect Options are as follows. 0 or eFMS_YESNO_NO - No 1 or eFMS_YESNO_YES - Yes
eFMS_CFG_CORIOLIS_PRESSURE_EFFECT	123	Percent of rate per gauge pressure (gas-specific)	Yes	Coriolis Pressure Effect
eFMS_CFG_CORIOLIS_CALIBRATION_PRESSURE	124	Pressure at which the pressure effect was calibrated (gas-specific)	Yes	Coriolis Calibration Pressure
eFMS_CFG_WATER_VAPOR_CORRECTION_FACTOR	74	Water vapor correction factor (gas-specific)	No	Water Vapor Correction factor
eFMS_CFG_WELL_STREAM_FACTOR	77	Well stream factor (gas-specific)	No	Well Stream factor
Metering Configuration Items - Liquid-Specific (not currently fully supported in FMS Explorer controls)
eFMS_CFG_DENSITY_METER_FACTOR	537	Density meter factor (liquid-specific)	No	DMF
eFMS_CFG_MASS_FLOW_RATE_ALARM_HIGH	132	Mass flow rate alarm - high (liquid-specific)	Yes	Flow Rate Alarm High
eFMS_CFG_MASS_FLOW_RATE_ALARM_LOW	131	Mass flow rate alarm - low (liquid-specific)	Yes	Flow Rate Alarm Low
eFMS_CFG_LIQ_K_FACTOR_MASS	543	K factor - mass (liquid-specific)	Yes	K Factor Mass
eFMS_CFG_LIQ_K_FACTOR_VOLUME	542	K factor - volume (liquid-specific)	Yes	K Factor Volume
eFMS_CFG_LIQUID_CALC_METHOD	539	Liquid calculation method (liquid-specific)	No	Liquid Calculation Method Options are as follows. 1 or eFMS_CFG_LIQUID_CALC_METHOD_NONE - None 2 or eFMS_CFG_LIQUID_CALC_METHOD_API_12_2 - API 12.2 3 or eFMS_CFG_LIQUID_CALC_METHOD_API_14_7 - API 14.7 4 or eFMS_CFG_LIQUID_CALC_METHOD_DIRECT_MASS - Direct Mass 5 or eFMS_CFG_LIQUID_CALC_METHOD_API_14_3_MASS - API 14.3: Mass 6 or eFMS_CFG_LIQUID_CALC_METHOD_API_14_3_VOLUME - API 14.3: Volume 7 - ISO 5167 (not supported)
eFMS_CFG_LIQUID_PRODUCT_INDEX	544	Product index (liquid-specific)	No	Product Index
eFMS_CFG_TOTALIZER_DIGITS	538	Totalizer digits (liquid-specific)	No	Totalizer Digits
Liquids Configuration Items
eFMS_CFG_SHRINK_FACTOR	604	Shrink factor	No	Shrink Factor
eFMS_CFG_STOCK_TANK_DENSITY	605	Stock tank - density	Yes	Stock Tank Density
eFMS_CFG_STOCK_TANK_SW	606	Stock tank - sediment and water	Yes	Stock Tank S&W
Custom Configuration Items
eFMS_CFG_CUSTOM1	500	Custom 1	No	As configured; can be any valid configuration item Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_CUSTOM2	501	Custom 2	No	As configured; can be any valid configuration item Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_CUSTOM3	502	Custom 3	No	As configured; can be any valid configuration item Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_CUSTOM4	503	Custom 4	No	As configured; can be any valid configuration item Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_CUSTOM5	504	Custom 5	No	As configured; can be any valid configuration item Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_CUSTOM6	505	Custom 6	No	As configured; can be any valid configuration item Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_CUSTOM7	506	Custom 7	No	As configured; can be any valid configuration item Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_CUSTOM8	507	Custom 8	No	As configured; can be any valid configuration item Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_CUSTOM9	508	Custom 9	No	As configured; can be any valid configuration item Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_CUSTOM10	509	Custom 10	No	As configured; can be any valid configuration item Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
Custom Configuration Items - Gas-Specific
eFMS_CFG_ACCUMULATED_VOLUME	517	Accumulated volume (gas-specific)	Yes	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information. Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_AIR	536	Air (gas-specific)	No	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information. Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_COLD_START_DATETIME	515	Cold start date/time (gas-specific)	No	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information. Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_CONTRACT_DAY	523	Contract day (gas-specific)	No	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information.
eFMS_CFG_DELIVERY_DATE	519	Delivery date (gas-specific)	No	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information. Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_DP_CALIBRATE_MID	525	DP calibrate - mid (gas-specific)	Yes	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information.
eFMS_CFG_EXPANSION_FACTOR	530	Expansion factor (gas-specific)	No	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information.
eFMS_CFG_FLOWING_TEMPERATURE_FACTOR	533	Flowing temperature factor (gas-specific)	No	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information. Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_LATITUDE	510	Latitude (gas-specific)	No	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information.
eFMS_CFG_LONGITUDE	511	Longitude (gas-specific)	No	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information. Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_METER_ACCESS_DATETIME	514	Meter access date/time (gas-specific)	No	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information.
eFMS_CFG_METER_SERIAL_NUMBER	518	Meter serial number (gas-specific)	No	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information. Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_ORIFICE_FITTING_TYPE	521	Orifice fitting type (gas-specific)	No	Can be mapped as a custom gas configuration item. Options are as follows. 1 or eFMS_ORIFICE_FITTING_TYPE_SENIOR - Senior 2 or eFMS_ORIFICE_FITTING_TYPE_JUNIOR - Junior 3 or eFMS_ORIFICE_FITTING_TYPE_SIMPLEX - Simplex See Configuring Custom Device Data in the CygNet Measurement section for more information. Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_ORIFICE_FLOW_FACTOR	528	Orifice flow factor (gas-specific)	No	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information. Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_POWER_SOURCE	520	Power source (gas-specific)	No	Can be mapped as a custom gas configuration item. Options are as follows. 1 or eFMS_CFG_POWER_SOURCE_AC - AC 2 or eFMS_CFG_POWER_SOURCE_BATT - Batt 3 or eFMS_CFG_POWER_SOURCE_SOLAR - Solar See Configuring Custom Device Data in the CygNet Measurement section for more information. Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_PRESSURE_BASE_FACTOR	531	Pressure base factor (gas-specific)	No	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information.
eFMS_CFG_RELATIVE_DENSITY_FACTOR	534	Relative density factor (gas-specific)	No	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information. Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_REYNOLDS_FACTOR	529	Reynolds factor (gas-specific)	No	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information.
eFMS_CFG_SP_CALIBRATE_MID	526	SP calibrate - mid (gas-specific)	Yes	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information. Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_SUPERCOMPRESSIBILITY_FACTOR	535	Supercompressibility factor (gas-specific)	No	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information. Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_TEMP_CALIBRATE_MID	527	Temp calibrate - mid (gas-specific)	Yes	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information. Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_TEMPERATURE_BASE_FACTOR	532	Temperature base factor (gas-specific)	No	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information. Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.
eFMS_CFG_WARM_START_DATETIME	516	Warm start date/time (gas-specific)	No	Can be mapped as a custom gas configuration item. See Configuring Custom Device Data in the CygNet Measurement section for more information. Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

FMS Configuration Data Item String

Enum

Data Item Description

Units Required for FMS?

FMS Explorer Description

Gas Analysis Configuration Items

Also valid: Quality configuration items (except those marked liquid-specific)

eFMS_CFG_GAS_ANALYSIS_BASE_PRESSURE

601

Base pressure

Yes

Base Pressure

eFMS_CFG_GAS_ANALYSIS_BASE_TEMPERATURE

602

Base temperature

Yes

Base Temperature

eFMS_CFG_GAS_ANALYSIS_HEATING_VALUE_BASIS

603

Heating Value basis

Heating Value Basis

eFMS_CFG_HEATING_VALUE_VOLUME_WET

545

Heating Value Volume - Wet

Yes

Heating Value Volume (Wet)

eFMS_CFG_HEATING_VALUE_VOLUME_DRY

546

Heating Value Volume - Dry

Yes

Heating Value Volume (Dry)

eFMS_CFG_HEATING_VALUE_VOLUME_AS_DELIVERED

547

Heating Value Volume - As delivered

Yes

Heating Value Volume - (As delivered)

eFMS_CFG_H2O_PER_VOLUME

548

Water - per volume unit

Yes

H2O per volume

eFMS_CFG_H2S_PPM

549

Hydrogen Sulfide - parts per million

Yes

H2S (PPM)

eFMS_CFG_TOTAL_H2S_PPM

554

Total Hydrogen Sulfide - parts per million

Yes

Total H2S (PPM)

eFMS_CFG_COS_PPM

550

Carbonyl Sulfide - parts per million

Yes

COS (PPM)

eFMS_CFG_MESH_PPM

551

Methanethiol - parts per million

Yes

MESH (PPM)

eFMS_CFG_ETSH_PPM

552

Ethanethiol - parts per million

Yes

ETSH (PPM)

eFMS_CFG_DMS_PPM

553

Dimethyl Sulfide - parts per million

Yes

DMS (PPM)

eFMS_CFG_SAMPLE_PRESSURE

555

Sample pressure

Yes

Sample Pressure

eFMS_CFG_SAMPLE_TEMPERATURE

556

Sample temperature

Yes

Sample Temperature

eFMS_CFG_SAMPLE_COUNT

557

Sample count

Sample Count

eFMS_CFG_SAMPLE_DATE

512

Sample date

Sample Date

eFMS_CFG_SAMPLE_TYPE

513

Sample type

Sample Type

Options are as follows.

1 or eFMS_CFG_SAMPLE_TYPE_SPOT - Spot; single sample taken
2 or eFMS_CFG_SAMPLE_TYPE_COMPOSITE - Composite; sample taken on regular interval
3 or eFMS_CFG_SAMPLE_TYPE_OFFLINE_UNKNOWN - Offline; method unknown
4 or eFMS_CFG_SAMPLE_TYPE_ONLINE - Online; chromatograph

eFMS_CFG_SAMPLE_RATE

522

Sample rate

Sample Rate

eFMS_CFG_INSTRUMENT_NUMBER

558

Instrument number for the sample

Instrument Number

eFMS_CFG_SAMPLE_TECHNICIAN

559

Name of the sample technician

Sample Technician

eFMS_CFG_SAMPLE_COMMENTS

560

Comments for the sample

Sample Comments

eFMS_CFG_ANALYSIS_TECHNICIAN

561

Name of the analysis technician

Analysis Technician

eFMS_CFG_ANALYSIS_COMMENTS

562

Comments for the analysis

Analysis Comments

eFMS_CFG_HEXANE_PLUS

563

Hexane plus

Yes

n-Hexane Plus

eFMS_CFG_ETHANE_LC

564

Ethane - Liquid Content

Yes

Ethane LC

eFMS_CFG_PROPANE_LC

565

Propane - Liquid Content

Yes

Propane LC

eFMS_CFG_ISOBUTANE_LC

607

Isobutane - Liquid Content

Yes

Isobutane LC

eFMS_CFG_N_BUTANE_LC

566

n-Butane - Liquid Content

Yes

n-Butane LC

eFMS_CFG_ISOPENTANE_LC

567

Isopentane - Liquid Content

Yes

Isopentane LC

eFMS_CFG_N_PENTANE_LC

568

n-Pentane - Liquid Content

Yes

n-Pentane LC

eFMS_CFG_N_HEXANE_LC

569

n-Hexane - Liquid Content

Yes

n-Hexane LC

eFMS_CFG_N_HEPTANE_LC

570

n-Heptane - Liquid Content

Yes

n-Heptane LC

eFMS_CFG_N_OCTANE_LC

608

n-Octane - Liquid Content

Yes

n-Octane LC

eFMS_CFG_N_NONANE_LC

609

n-Nonane - Liquid Content

Yes

n-Nonane LC

eFMS_CFG_N_DECANE_LC

610

n-Decane - Liquid Content

Yes

n-Decane LC

eFMS_CFG_CONDENSATE_LC

571

Condensate - Liquid Content

Yes

Condensate LC

Custom Gas Analysis Configuration Items

eFMS_CFG_CUSTOM_NUMBER1

596

Custom Number 1

As configured; can be any valid supported numerical configuration item

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_CUSTOM_NUMBER2

597

Custom Number 2

As configured; can be any valid supported numerical configuration item

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_CUSTOM_NUMBER3

598

Custom Number 3

As configured; can be any valid supported numerical configuration item

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_CUSTOM_NUMBER4

599

Custom Number 4

As configured; can be any valid supported numerical configuration item

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_CUSTOM_NUMBER5

600

Custom Number 5

As configured; can be any valid supported numerical configuration item

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

Quality Configuration Items

(also valid as Gas Analysis or Metering configuration items, except those marked liquid-specific)

eFMS_CFG_METHANE

Methane (C1)

Yes

Methane

eFMS_CFG_ETHANE

Ethane (C2)

Yes

Ethane

eFMS_CFG_PROPANE

Propane (C3)

Yes

Propane

eFMS_CFG_ISOBUTANE

Isobutane (isoC4)

Yes

Isobutane

eFMS_CFG_N_BUTANE

n-Butane (C4)

Yes

n-Butane

eFMS_CFG_ISOPENTANE

Isopentane (isoC5)

Yes

Isopentane

eFMS_CFG_N_PENTANE

n-Pentane (C5)

Yes

n-Pentane

eFMS_CFG_NEO_PENTANE

Neopentane (neoC5)

Yes

Neopentane

eFMS_CFG_N_HEXANE

n-Hexane (C6)

Yes

n-Hexane

eFMS_CFG_N_HEPTANE

n-Heptane (C7)

Yes

n-Heptane

eFMS_CFG_N_OCTANE

n-Octane (C8)

Yes

n-Octane

eFMS_CFG_N_NONANE

n-Nonane (C9)

Yes

n-Nonane

eFMS_CFG_N_DECANE

n-Decane (C10)

Yes

n-Decane

eFMS_CFG_NITROGEN

Nitrogen (N2)

Yes

Nitrogen

eFMS_CFG_CARBON_DIOXIDE

Carbon dioxide (CO2)

Yes

Carbon Dioxide

eFMS_CFG_WATER

Water (H2O)

Yes

Water

eFMS_CFG_HYDROGEN_SULFIDE

Hydrogen sulfide (H2S)

Yes

Hydrogen Sulfide

eFMS_CFG_HYDROGEN

Hydrogen (H2)

Yes

Hydrogen

eFMS_CFG_CARBON_MONOXIDE

Carbon monoxide (CO)

Yes

Carbon Monoxide

eFMS_CFG_OXYGEN

Oxygen (O2)

Yes

Oxygen

eFMS_CFG_HELIUM

Helium (He)

Yes

Helium

eFMS_CFG_ARGON

Argon (Ar)

Yes

Argon

eFMS_CFG_DEW_POINT

Dew point

Dew Point

eFMS_CFG_RELATIVE_DENSITY

Relative density

Relative Density

eFMS_CFG_VISCOSITY

Viscosity

Yes

Viscosity

Quality Configuration Items - Gas-Specific

eFMS_CFG_COMPRESSIBILITY

Compressibility

(gas-specific)

Compressibility

eFMS_CFG_HEATING_VALUE_BASIS

Heating value basis

(gas-specific)

(Config) Heating Value Basis

Options are as follows.

1 or eFMS_CFG_HEATING_VALUE_BASIS_WET - Wet
2 or eFMS_CFG_HEATING_VALUE_BASIS_DRY - Dry
3 or eFMS_CFG_HEATING_VALUE_BASIS_AS_DELIVERED - As delivered
4 or eFMS_CFG_HEATING_VALUE_BASIS_UNSPECIFIED - Unspecified

eFMS_CFG_HEATING_VALUE_MASS

Heating value - mass

(gas-specific)

Yes

(Config) Heating Value Mass

eFMS_CFG_HEATING_VALUE_VOLUME

Heating value - volume

(gas-specific)

Yes

(Config) Heating Value Volume

Quality Configuration Items - Liquid-Specific

(not currently supported in FMS Explorer controls)

eFMS_CFG_ETHYLENE

540

Ethylene

(liquid-specific)

Yes

Ethylene

eFMS_CFG_PROPYLENE

541

Propylene

(liquid-specific)

Yes

Propylene

Metering Configuration Items

Also valid: Quality configuration items (except those marked liquid-specific)

eFMS_CFG_ATMOSPHERIC_PRESSURE

Atmospheric pressure

Yes

Atmospheric Pressure

eFMS_CFG_CALIBRATION_FACTOR

Calibration factor

Calibration Factor

eFMS_CFG_CONTRACT_HOUR

Contract hour

Contract Hour

eFMS_CFG_DP_ALARM_HIGH

107

DP alarm - high

Yes

DP Alarm High

eFMS_CFG_DP_ALARM_LOW

106

DP alarm - low

Yes

DP Alarm Low

eFMS_CFG_DP_BACKFLOW_ALARM

114

DP alarm - backflow

Yes

DP Backflow Alarm

eFMS_CFG_DP_CALIBRATE_HIGH

116

DP calibrate - high

Yes

DP Calibrate High

eFMS_CFG_DP_CALIBRATE_LOW

115

DP calibrate - low

Yes

DP Calibrate Low

eFMS_CFG_DP_TAPS_TYPE

DP taps type

DP Tap Style

Options are as follows.

1 or eFMS_CFG_DP_TAPS_TYPE_FLANGE - Flange
2 or eFMS_CFG_DP_TAPS_TYPE_PIPE - Pipe

eFMS_CFG_DP_TRANSDUCER_RANGE_HIGH

101

DP transducer range - high

Yes

DP Transducer Range High

eFMS_CFG_DP_TRANSDUCER_RANGE_LOW

100

DP transducer range - low

Yes

DP Transducer Range Low

eFMS_CFG_ELEVATION

Elevation

Yes

Elevation

eFMS_CFG_FIXED_TEMP

Fixed temperature

Yes

Fixed Temp (if eFMS_CFG_USE_LIVE_TEMP = No)

eFMS_CFG_FLOW_COMPUTER_ID

133

Flow computer ID

Flow Computer ID

eFMS_CFG_FLOW_COMPUTER_BRAND

134

Flow computer brand

Flow Computer Brand

eFMS_CFG_FLOW_COMPUTER_MODEL

135

Flow computer model

Flow Computer Model

eFMS_CFG_FLOW_COMPUTER_SOFTWARE_VERSION

136

Flow computer software version

Flow Computer Software Version

eFMS_CFG_FLOW_RATE_ALARM_HIGH

113

Flow rate - high

Yes

Flow Rate Alarm High

eFMS_CFG_FLOW_RATE_ALARM_LOW

112

Flow rate - low

Yes

Flow Rate Alarm Low

eFMS_CFG_FLUID_TYPE

Fluid type

Fluid Type

Options are as follows.

1 or eFMS_CFG_FLUID_TYPE_COMPRESSIBLE - Compressible
2 or eFMS_CFG_FLUID_TYPE_NONCOMPRESSIBLE - Non-compressible

eFMS_CFG_ISENTROPIC_EXPONENT

Isentropic exponent

Isentropic Exponent

eFMS_CFG_LOW_FLOW_CUTOFF_DP

Low flow cutoff - differential pressure

Yes

Low Flow Cutoff DP

(can apply to Orifice or Cone device type)

eFMS_CFG_LOW_FLOW_CUTOFF_FLOW_RATE

Low flow cutoff - volume flow rate

Yes

Low Flow Cutoff Flow Rate

(can apply to Orifice, Turbine, Ultrasonic, Cone, or Coriolis device type)

eFMS_CFG_LOW_FLOW_CUTOFF_MASS

128

Low flow cutoff - mass flow rate

Yes

Low Flow Cutoff Mass

(can apply to Coriolis device type)

eFMS_CFG_LOW_FLOW_CUTOFF_PULSE_INTERVAL

Low flow cutoff - pulse interval

Yes

Low Flow Cutoff Pulse Interval

(can apply to Turbine, Ultrasonic, or Coriolis device type)

eFMS_CFG_METER_DESC

Meter description

Device Desc

eFMS_CFG_METER_FACTOR

Meter factor

Meter Factor

eFMS_CFG_METER_ID

Meter ID

Device Name

eFMS_CFG_METER_TUBE_INSIDE_DIAMETER

Meter tube inside diameter

Yes

Meter Tube Inside Diameter

eFMS_CFG_METER_TUBE_MATERIAL

Meter tube material

Meter Tube Material

Options are as follows.

1 or eFMS_CFG_MATERIAL_TYPE_STAINLESS_STEEL - Stainless steel (unspecified type)
2 or eFMS_CFG_MATERIAL_TYPE_MONEL - Monel (valid for AGA 3 1985 or 1992 only)
3 or eFMS_CFG_MATERIAL_TYPE_CARBON_STEEL - Carbon steel
4 or eFMS_CFG_MATERIAL_TYPE_UNSPECIFIED - Unspecified
5 or eFMS_CFG_MATERIAL_TYPE_STAINLESS_STEEL_304 - Stainless steel 304 (valid for AGA 3 2013 only)
6 or eFMS_CFG_MATERIAL_TYPE_STAINLESS_STEEL_316 - Stainless steel 316 (valid for AGA 3 2013 only)
7 or eFMS_CFG_MATERIAL_TYPE_MONEL_400 - Monel 400 (valid for AGA 3 2013 only)

Note: This field is "Unspecified" for devices that do not return a material type value. In these cases, a (non-zero) thermal expansion coefficient value (eFMS_CFG_PIPE_COEFFICIENT_THERMAL_EXPANSION) is required for calculation to succeed.

eFMS_CFG_METER_TUBE_REF_TEMP

Meter tube reference temperature

Yes

Meter Tube Ref Temp

eFMS_CFG_METER_TYPE

Meter type

Device Type

Options are as follows.

1 or eFMS_CFG_METER_TYPE_ORIFICE - Orifice
2 or eFMS_CFG_METER_TYPE_POSITIVE - Positive (supported for liquid devices)
3 or eFMS_CFG_METER_TYPE_TURBINE - Turbine
4 or eFMS_CFG_METER_TYPE_ULTRASONIC - Ultrasonic
5 - (not supported)
6 or eFMS_CFG_METER_TYPE_CONE - Cone
7 or eFMS_CFG_METER_TYPE_CORIOLIS - Coriolis

eFMS_CFG_ORIFICE_PLATE_BORE_SIZE

Orifice plate bore size

Yes

Orifice Plate Bore Size

eFMS_CFG_ORIFICE_PLATE_MATERIAL

Orifice plate material

Orifice Plate Material

Options are as follows.

1 or eFMS_CFG_MATERIAL_TYPE_STAINLESS_STEEL - Stainless steel (unspecified type)
2 or eFMS_CFG_MATERIAL_TYPE_MONEL - Monel (valid for AGA 3 1985 or 1992 only)
3 or eFMS_CFG_MATERIAL_TYPE_CARBON_STEEL - Carbon steel
4 or eFMS_CFG_MATERIAL_TYPE_UNSPECIFIED - Unspecified
5 or eFMS_CFG_MATERIAL_TYPE_STAINLESS_STEEL_304 - Stainless steel 304 (valid for AGA 3 2013 only)
6 or eFMS_CFG_MATERIAL_TYPE_STAINLESS_STEEL_316 - Stainless steel 316 (valid for AGA 3 2013 only)
7 or eFMS_CFG_MATERIAL_TYPE_MONEL_400 - Monel 400 (valid for AGA 3 2013 only)

eFMS_CFG_ORIFICE_PLATE_REF_TEMP

Orifice plate reference temperature

Yes

Orifice Plate Ref Temp

eFMS_CFG_SP_ALARM_HIGH

109

SP alarm - high

Yes

SP Alarm High

eFMS_CFG_SP_ALARM_LOW

108

SP alarm - low

Yes

SP Alarm Low

eFMS_CFG_SP_CALIBRATE_HIGH

118

SP calibrate - high

Yes

SP Calibrate High

eFMS_CFG_SP_CALIBRATE_LOW

117

SP calibrate - low

Yes

SP Calibrate Low

eFMS_CFG_SP_SENSOR_TYPE

SP sensor type

SP Sensor Type

Options are as follows.

1 or eFMS_CFG_SP_SENSOR_TYPE_ABSOLUTE - Absolute
2 or eFMS_CFG_SP_SENSOR_TYPE_GAUGE - Gauge

eFMS_CFG_SP_TAP_LOCATION

SP tap location

SP Tap Location

Options are as follows.

1 or eFMS_CFG_SP_TAP_LOCATION_UPSTREAM - Upstream
2 or eFMS_CFG_SP_TAP_LOCATION_DOWNSTREAM - Downstream

eFMS_CFG_SP_TRANSDUCER_RANGE_LOW

102

SP transducer range - low

Yes

SP Transducer Range Low

eFMS_CFG_SP_TRANSDUCER_RANGE_HIGH

103

SP transducer range - high

Yes

SP Transducer Range High

eFMS_CFG_TEMP_ALARM_HIGH

111

Temp alarm - high

Yes

Temp Alarm High

eFMS_CFG_TEMP_ALARM_LOW

110

Temp alarm - low

Yes

Temp Alarm Low

eFMS_CFG_TEMP_CALIBRATE_HIGH

120

Temp calibrate - high

Yes

Temp Calibrate High

eFMS_CFG_TEMP_CALIBRATE_LOW

119

Temp calibrate - low

Yes

Temp Calibrate Low

eFMS_CFG_TEMP_CALIBRATE_ZERO

121

Temp calibrate - zero

Yes

Temp Calibrate Zero

eFMS_CFG_TEMP_TRANSDUCER_RANGE_LOW

104

Temp transducer range - low

Yes

Temp Transducer Range Low

eFMS_CFG_TEMP_TRANSDUCER_RANGE_HIGH

105

Temp transducer range - high

Yes

Temp Transducer Range High

eFMS_CFG_USE_LIVE_TEMP

Use live temperature

Use Live Temp

Options are as follows.

0 or eFMS_YESNO_NO - No
1 or eFMS_YESNO_YES - Yes

eFMS_CFG_USE_LIVE_K_FACTOR

125

Use live K factor

Use Live K Factor

Options are as follows.

0 or eFMS_YESNO_NO - No
1 or eFMS_YESNO_YES - Yes

eFMS_CFG_USE_LIVE_METER_FACTOR

126

Use live meter factor

Use Live Meter Factor

Options are as follows.

0 or eFMS_YESNO_NO - No
1 or eFMS_YESNO_YES - Yes

Metering Configuration Items - Gas-Specific

eFMS_CFG_AGA3_EXPANDED_RANGE

AGA 3 Expanded Range

(gas-specific)

AGA 3 Expanded Range

Options are as follows.

0 or eFMS_YESNO_NO - No
1 or eFMS_YESNO_YES - Yes

eFMS_CFG_AGA8_EXPANDED_RANGE

See AGA 8 Data Ranges for more information.

AGA 8 Expanded Range

(gas-specific)

AGA 8 Expanded Range

Options are as follows.

0 or eFMS_YESNO_NO - No
1 or eFMS_YESNO_YES - Yes

eFMS_CFG_BASE_COMPRESSIBILITY_OF_AIR

Standard air compressibility

(gas-specific)

Base Compressibility of Air

eFMS_CFG_BASE_PRESSURE

Base pressure

(gas-specific)

Yes

(Config) Base Pressure

eFMS_CFG_BASE_TEMPERATURE

Base temperature

(gas-specific)

Yes

(Config) Base Temp

eFMS_CFG_CALC_METHOD_DISCHARGE_COEFFICIENT

Discharge coefficient calc method

(gas-specific)

Discharge Coefficient Calc

Options are as follows.

1 or eFMS_CFG_CALC_METHOD_DISCHARGE_COEFFICIENT_NONE - None

eFMS_CFG_CALC_METHOD_FPV

Compressibility calc method

(gas-specific)

FPV Calc

Options are as follows.

1 or eFMS_CFG_CALC_METHOD_FPV_AGA8_GROSS_1 - AGA 8 Gross 1
2 or eFMS_CFG_CALC_METHOD_FPV_AGA8_GROSS_2 - AGA 8 Gross 2
3 or eFMS_CFG_CALC_METHOD_FPV_AGA8_DETAIL - AGA 8 Detail
4 or eFMS_CFG_CALC_METHOD_FPV_NX19_GCN - NX 19 GCN
5 or eFMS_CFG_CALC_METHOD_FPV_NX19_COMPLETE - NX 19 Complete
6 or eFMS_CFG_CALC_METHOD_FPV_NONE - None
7 - GERG (not supported)

eFMS_CFG_CALC_METHOD_GAS_EXPANSION_FACTOR

Gas expansion factor calc method

(gas-specific)

Gas Expansion Factor Calc

Options are as follows.

1 or eFMS_CFG_CALC_METHOD_GAS_EXPANSION_FACTOR_NONE - None

eFMS_CFG_CALC_METHOD_HV

Heating value calc method

(gas-specific)

HV Calc

Options are as follows.

1 or eFMS_CFG_CALC_METHOD_HV_AGA5 - AGA 5
2 or eFMS_CFG_CALC_METHOD_HV_GPA2172 - GPA 2172
3 or eFMS_CFG_CALC_METHOD_HV_NONE - None

Note: For gas analysis, FMS calculations are based on GPA 2172-09. See CygNet Measurement Data Calculation for more information.

eFMS_CFG_CALC_METHOD_PRIMARY

Primary calc method

(gas-specific)

Primary Calc

Options are as follows.

1 or eFMS_CFG_CALC_METHOD_PRIMARY_AGA3_85 - AGA 3 1985
2 or eFMS_CFG_CALC_METHOD_PRIMARY_AGA3_92 - AGA 3 1992
3 or eFMS_CFG_CALC_METHOD_PRIMARY_AGA7 - AGA 7
4 - Cone (not supported)
5 - AGA 9 (not supported)
6 or eFMS_CFG_CALC_METHOD_PRIMARY_AGA11 - AGA 11
7 or eFMS_CFG_CALC_METHOD_PRIMARY_VCONE - VCone
8 - AGA 5 (not supported)
9 - ISO 9951 (not supported)
10 - ISO 5167 (not supported)
11 or eFMS_CFG_CALC_METHOD_PRIMARY_WAFER_CONE - Wafer Cone
12 or eFMS_CFG_CALC_METHOD_PRIMARY_AGA3_13 - AGA 3 2013

eFMS_CFG_CONE_COEFFICIENT_THERMAL_EXPANSION

130

Cone thermal expansion coefficient

(gas-specific)

Yes

Cone Expansion Coefficient

eFMS_CFG_CONE_DIAMETER

Cone diameter

(gas-specific)

Yes

Cone Diameter

eFMS_CFG_CONE_MATERIAL

Cone material

(gas-specific)

Cone Material

Options are as follows.

1 or eFMS_CFG_MATERIAL_TYPE_STAINLESS_STEEL - Stainless steel
2 or eFMS_CFG_MATERIAL_TYPE_MONEL - Monel
3 or eFMS_CFG_MATERIAL_TYPE_CARBON_STEEL - Carbon steel
4 or eFMS_CFG_MATERIAL_TYPE_UNSPECIFIED - Unspecified

Note: This field is "Unspecified" for devices that do not return a material type value. In these cases, a (non-zero) thermal expansion coefficient value (eFMS_CFG_CONE_COEFFICIENT_THERMAL_EXPANSION) is required for calculation to succeed.

eFMS_CFG_CONE_REF_TEMP

Cone reference temperature

(gas-specific)

Yes

Cone Ref Temp

eFMS_CFG_DISCHARGE_COEFFICIENT

Discharge coefficient

(gas-specific)

Discharge Coefficient

eFMS_CFG_INTEGRAL_VALUE_VARIABLES

Variables included in IV

(gas-specific)

IV Definition

Options are as follows.

1 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_BASE_FT - (FT*DP[inh2o]*SP[psia])
2 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_PLUS_TEMP_FT - (FT*DP[inh2o]*SP[psia])/T[R]
3 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_PLUS_GR_FT - (FT*DP[inh2o]*SP[psia])/Gr
4 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_PLUS_TEMP_GR_FT - (FT*DP[inh2o]*SP[psia])/(T[R]*Gr))
5 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_NONE - None
6 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_BASE_EX1_FT - (FT*DP[mBar]*SP[bar])
7 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_PLUS_TEMP_EX1_FT - (FT*DP[mBar]*SP[bar])/T[K]
8 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_BASE - (DP[inh2o]*SP[psia])
9 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_PLUS_TEMP - (DP[inh2o]*SP[psia])/T[R]
10 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_PLUS_GR - (DP[inh2o]*SP[psia])/Gr
11 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_PLUS_TEMP_GR - (DP[inh2o]*SP[psia])/(T[R]*Gr)
12 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_BASE_EX1 - (DP[mBar]*SP[bar])
13 or eFMS_CFG_INTEGRAL_VALUE_VARIABLES_PLUS_TEMP_EX1 - (DP[mBar]*SP[bar])/T[K]

eFMS_CFG_GAS_K_FACTOR_MASS

127

K factor - mass

(gas-specific)

Yes

K Factor Mass

eFMS_CFG_GAS_K_FACTOR_VOLUME

K factor - volume

(gas-specific)

Yes

K Factor Volume

eFMS_CFG_ORIFICE_COEFFICIENT_THERMAL_EXPANSION

Orifice (linear) thermal expansion coefficient

(gas-specific)

Yes

Orifice Expansion Coefficient

eFMS_CFG_PIPE_COEFFICIENT_THERMAL_EXPANSION

Pipe (linear) thermal expansion coefficient

(gas-specific)

Yes

Pipe Expansion Coefficient

eFMS_CFG_LINEAR_CURVE_TYPE

129

Linear curve type

(gas-specific)

Linear Curve Type

Options are as follows.

1 or eFMS_CFG_LINEAR_CURVE_TYPE_BOTH_CONST - Meter Factor and K Factor are both constant
2 or eFMS_CFG_LINEAR_CURVE_TYPE_KF_AVG - K Factor is averaged, and Meter Factor is constant
3 or eFMS_CFG_LINEAR_CURVE_TYPE_MF_AVG - Meter Factor is averaged, and K Factor is constant

eFMS_CFG_USE_CORIOLIS_PRESSURE_EFFECT

122

Use coriolis pressure effect

(gas-specific)

Use Coriolis Pressure Effect

Options are as follows.

0 or eFMS_YESNO_NO - No
1 or eFMS_YESNO_YES - Yes

eFMS_CFG_CORIOLIS_PRESSURE_EFFECT

123

Percent of rate per gauge pressure

(gas-specific)

Yes

Coriolis Pressure Effect

eFMS_CFG_CORIOLIS_CALIBRATION_PRESSURE

124

Pressure at which the pressure effect was calibrated

(gas-specific)

Yes

Coriolis Calibration Pressure

eFMS_CFG_WATER_VAPOR_CORRECTION_FACTOR

Water vapor correction factor

(gas-specific)

Water Vapor Correction factor

eFMS_CFG_WELL_STREAM_FACTOR

Well stream factor

(gas-specific)

Well Stream factor

Metering Configuration Items - Liquid-Specific

(not currently fully supported in FMS Explorer controls)

eFMS_CFG_DENSITY_METER_FACTOR

537

Density meter factor

(liquid-specific)

DMF

eFMS_CFG_MASS_FLOW_RATE_ALARM_HIGH

132

Mass flow rate alarm - high

(liquid-specific)

Yes

Flow Rate Alarm High

eFMS_CFG_MASS_FLOW_RATE_ALARM_LOW

131

Mass flow rate alarm - low

(liquid-specific)

Yes

Flow Rate Alarm Low

eFMS_CFG_LIQ_K_FACTOR_MASS

543

K factor - mass

(liquid-specific)

Yes

K Factor Mass

eFMS_CFG_LIQ_K_FACTOR_VOLUME

542

K factor - volume

(liquid-specific)

Yes

K Factor Volume

eFMS_CFG_LIQUID_CALC_METHOD

539

Liquid calculation method

(liquid-specific)

Liquid Calculation Method

Options are as follows.

1 or eFMS_CFG_LIQUID_CALC_METHOD_NONE - None
2 or eFMS_CFG_LIQUID_CALC_METHOD_API_12_2 - API 12.2
3 or eFMS_CFG_LIQUID_CALC_METHOD_API_14_7 - API 14.7
4 or eFMS_CFG_LIQUID_CALC_METHOD_DIRECT_MASS - Direct Mass
5 or eFMS_CFG_LIQUID_CALC_METHOD_API_14_3_MASS - API 14.3: Mass
6 or eFMS_CFG_LIQUID_CALC_METHOD_API_14_3_VOLUME - API 14.3: Volume
7 - ISO 5167 (not supported)

eFMS_CFG_LIQUID_PRODUCT_INDEX

544

Product index

(liquid-specific)

Product Index

eFMS_CFG_TOTALIZER_DIGITS

538

Totalizer digits

(liquid-specific)

Totalizer Digits

Liquids Configuration Items

eFMS_CFG_SHRINK_FACTOR

604

Shrink factor

Shrink Factor

eFMS_CFG_STOCK_TANK_DENSITY

605

Stock tank - density

Yes

Stock Tank Density

eFMS_CFG_STOCK_TANK_SW

606

Stock tank - sediment and water

Yes

Stock Tank S&W

Custom Configuration Items

eFMS_CFG_CUSTOM1

500

Custom 1

As configured; can be any valid configuration item

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_CUSTOM2

501

Custom 2

As configured; can be any valid configuration item

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_CUSTOM3

502

Custom 3

As configured; can be any valid configuration item

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_CUSTOM4

503

Custom 4

As configured; can be any valid configuration item

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_CUSTOM5

504

Custom 5

As configured; can be any valid configuration item

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_CUSTOM6

505

Custom 6

As configured; can be any valid configuration item

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_CUSTOM7

506

Custom 7

As configured; can be any valid configuration item

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_CUSTOM8

507

Custom 8

As configured; can be any valid configuration item

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_CUSTOM9

508

Custom 9

As configured; can be any valid configuration item

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_CUSTOM10

509

Custom 10

As configured; can be any valid configuration item

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

Custom Configuration Items - Gas-Specific

eFMS_CFG_ACCUMULATED_VOLUME

517

Accumulated volume

(gas-specific)

Yes

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_AIR

536

Air

(gas-specific)

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_COLD_START_DATETIME

515

Cold start date/time

(gas-specific)

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_CONTRACT_DAY

523

Contract day

(gas-specific)

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

eFMS_CFG_DELIVERY_DATE

519

Delivery date

(gas-specific)

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_DP_CALIBRATE_MID

525

DP calibrate - mid

(gas-specific)

Yes

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

eFMS_CFG_EXPANSION_FACTOR

530

Expansion factor

(gas-specific)

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

eFMS_CFG_FLOWING_TEMPERATURE_FACTOR

533

Flowing temperature factor

(gas-specific)

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_LATITUDE

510

Latitude

(gas-specific)

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

eFMS_CFG_LONGITUDE

511

Longitude

(gas-specific)

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_METER_ACCESS_DATETIME

514

Meter access date/time

(gas-specific)

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

eFMS_CFG_METER_SERIAL_NUMBER

518

Meter serial number

(gas-specific)

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_ORIFICE_FITTING_TYPE

521

Orifice fitting type

(gas-specific)

Can be mapped as a custom gas configuration item.

Options are as follows.

1 or eFMS_ORIFICE_FITTING_TYPE_SENIOR - Senior
2 or eFMS_ORIFICE_FITTING_TYPE_JUNIOR - Junior
3 or eFMS_ORIFICE_FITTING_TYPE_SIMPLEX - Simplex

See Configuring Custom Device Data in the CygNet Measurement section for more information.

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_ORIFICE_FLOW_FACTOR

528

Orifice flow factor

(gas-specific)

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_POWER_SOURCE

520

Power source

(gas-specific)

Can be mapped as a custom gas configuration item.

Options are as follows.

1 or eFMS_CFG_POWER_SOURCE_AC - AC
2 or eFMS_CFG_POWER_SOURCE_BATT - Batt
3 or eFMS_CFG_POWER_SOURCE_SOLAR - Solar

See Configuring Custom Device Data in the CygNet Measurement section for more information.

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_PRESSURE_BASE_FACTOR

531

Pressure base factor

(gas-specific)

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

eFMS_CFG_RELATIVE_DENSITY_FACTOR

534

Relative density factor

(gas-specific)

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_REYNOLDS_FACTOR

529

Reynolds factor

(gas-specific)

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

eFMS_CFG_SP_CALIBRATE_MID

526

SP calibrate - mid

(gas-specific)

Yes

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_SUPERCOMPRESSIBILITY_FACTOR

535

Supercompressibility factor

(gas-specific)

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_TEMP_CALIBRATE_MID

527

Temp calibrate - mid

(gas-specific)

Yes

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_TEMPERATURE_BASE_FACTOR

532

Temperature base factor

(gas-specific)

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.

eFMS_CFG_WARM_START_DATETIME

516

Warm start date/time

(gas-specific)

Can be mapped as a custom gas configuration item.

See Configuring Custom Device Data in the CygNet Measurement section for more information.

Note: To avoid a database misconfiguration, DO NOT re-map this item once it is initially mapped.